Straight Vane Steel Solid Rigid Centralizer

Straight Vane Steel Solid Rigid Centralizer

china Straight Vane Steel Solid Rigid Centralizer Information

  • 1.Sizes ranging from 4-1/2″ to 20″
  • 2.Suitable for cased or open hole
  • 3.High tensile and corrosion resitance
  • 4.30 degree beveled vane end
  • 5.Softer material

Straight Vane Steel Solid Rigid Centralizer Advantage

1.The type of solid rigid centralizer should be used in areas where a good primary cementing job is required, including deviated and horizontal wells, liner overlaps, and shoe joints.
2.They are suitable for either cased or open hole.
3.The centralizers are made of high tensile, solid, cast steel, for shock, impact, and corrosion resistance.
4.Vane ends are beveled 30 degrees relative to casing centerline to provide excellent lead into restrictions, and reduced drag when running into hole.
5.Wide vanes distribute load from the casing string into the wellbore without gouging.
6.It is made of softer material than wellhead equipment to avoid damage to the wellhead when running through.
7.Has provided excellent results in extended reach and horizontal applications.
8.The design of the vanes keeps running forces at a minimum.
9.Any special sizes or combination can available on request.

China Straight Vane Steel Solid Rigid Centralizer images for sales

China Straight Vane Steel Solid Rigid Centralizer  Images For Sales
China Straight Vane Steel Solid Rigid Centralizer Images For Sales
Choose Your Language